Kid's Pack zip line kit
Kid's Pack zip line kit

Kid's Pack

Price
$ 254.10
Taxes and shipping calculated at checkout

FREE US Ground Shipping on orders over $395 (up to 150lbs, excludes AK, HI & Freight)

Frequently Bought Together

This Kids Rider Kit is a perfect addition to any zip line kit, but especially those like the Sleadd 150LX, or the Chetco Zip Line Kit. 

See other Rider Kits.

  

Not only do you get the Kid's Pack, but you get the very best customer service in all the land.
If you're not happy, send it back for a full refund within one year.
  • Riding Gear includes a Petzl Simba Child's Full Body Harness (perfect for kids up to 80 lbs), a Daisy Chain Lanyard and 2 Carabiners, all used to connect the rider to the trolley. 
  • 20' Bungee Brake Kit designed to gently slow riders on zip lines that are up to 250 feet long. 
  • 15' Multi-purpose line to attach to your trolley, so you can easily walk the trolley back to the start. 

FREE Design consultation

Want to talk with a specialist about your project?

Schedule a free 25 minute consult to help you plan your zip line project. 

Schedule A Call

Zip Line University

Explore Our Knowledge Base

Installing a planning a zipline can seem like a daunting project. We're here to demystify the process!

Explore the Knowledge Base

Learn more about zipline installation

FAQ

How do I measure elevation change in my backyard?

Please refer to the manual that comes with your kit for specific installation instructions. 

Stand at the end tree and hold a 4 FT Carpenter’s Level like a rifle.  Holding one end up to your eye, point the opposite end at the base of the starting tree, right where the dirt and tree meet. Make sure the bubble is between the two hashes indicating level (crouch down if your yard has a minimal slope or climb a ladder if your yard has lots of slope).  

Once you have the level aiming at the base of the starting tree, measure from the Carpenter’s Level down to the ground.  This measurement is your natural elevation change.

If you have questions, please do not hesitate to give us a call at 888-476-3701

How do I figure out the slope for my zip line?

Please refer to the manual that comes with your kit for specific installation instructions.

The slope determines the speed of the zip line. Essentially this is the angle you set the cable at between the two trees. The slope is calculated by multiplying the distance between your trees times .03 or 3%.

More details on Slope can be found in the Zip Line Gear handbook included with your purchase. You can also view a digital version of the “Cable Slope & Sag” right here. We recommend finding a landscape with a natural slope of 3% to 6%, This is a 3’ - 6’ foot drop per 100’ feet. 

For zip lines that will NOT utilize a Bungee Brake System, (a Stop Block is NOT a braking system) the maximum allowable slope is 3%. For zip line setups that include a Bungee Brake, the maximum allowable slope is 6%. 

!!WARNING!! Zip line must never exceed 6% (6’ foot drop per 100’ feet) riding slope. High speed collision with end point may cause injury or death.

I don't have trees. Can I use posts?

Yes you can, but you need to carefully read the instructions for how to select, and install posts in the Backyard Zip Lines handbook included with your purchase. Alternatively, you can review the information in the digital version of our handbook right here.

If you are in any doubt as to how to properly select and install a wood post, please do not hesitate to contact us at 888-476-3701.

Recommended for You